2B Linear unit connectors
KE.E Cross linear unit connectors for one-axis systems,
stainless steel

KE.E Cross linear unit connectors for one-axis systems,
stainless steel

Product description

Cross linear unit connectors KE.E of precision-cast stainless steel have slitted clamping points and guide element bores machined by cutting methods and equipped with a sliding insert. The bores are offset in the plane and arranged at an angle of 90°.

Together with the guide tube of the linear unit, the guide element bores form a solid linear round guide mechanism that can be adjusted and clamped for low play. Drive keys transmit the linear movement of the linear unit to the linear unit connector.

Depending on the design, the part to be moved is fastened to the guide element or the guide element itself is installed at the place of use such that the entire linear unit moves together. At the screw points, carriage bolts together with cap nuts or adjustable hand levers reduce the guide element bore or clamping point size. Type B is equipped with seals at the screw points.

Adjustable hand levers are intended for repeated, tool-free clamping. Under the designation HEK, these are available separately for individual use and in other designs. Compared with the tool-operated hex socket cap screw, the clamping force achievable with an adjustable hand lever is lower due to the shorter lever length.

RoHS-compliant product

 KE.E Cross linear unit connectors for one-axis systems, stainless steel Typ: B - With seals (sealing washer polyacetal POM, blue, spacer ring silicone 40 ... 60 Shore A, blue)
 KE.E Cross linear unit connectors for one-axis systems, stainless steel Typ: A - Without seals
Article options / Table

Typ

AWithout seals
BWith seals (sealing washer polyacetal POM, blue, spacer ring silicone 40 ... 60 Shore A, blue)

Screw points

4Cap nut stainless steel DIN 917-A2 and carriage bolt stainless steel DIN 603-A2
Show columns
d1 - d2
with
sleeve bearing
bd3d4
Mounting
screws on
the drive key
k
Clamping
length
l1mHex socket
cap screws
Accessories
recom. hand lever
HEK for z
lever length
l2
G30 - B302237M 44010433M 878
G50 - B503060M 66515053M 1092
Build & Price
Bore d1 - d2 (with sliding insert)
Typ


Screw points

Part number
KE.E-G30-B30-B-4
If there is no weight available, please contact our customer support:
phone: +49 (0)2226 - 90 98 7 - 0
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Quick-Login

For getting CAD data please enter you Email address. But we would be pleased, if you are fully registered.

Please enter the code you can find in the picture.