1B Tube clamps
GSF.P Joint clamps, plastic

GSF.P Joint clamps, plastic

Original design
code: TCC-AP-PBF / TCC-AP-PB
Product description

Joint clamps GSF.P of glass fiber reinforced polyamide have a slitted clamping point. They are comprised of swivel clamps LSF.P and LST.P.

The clamping point bore is centered in the plane and can be rotated by ± 90° perpendicular to the flange face. It receives typically available construction tubes with full surface contact over the entire cross-section of the bore.

Adapter bushings RBS.P can be used to reduce the bore cross-sections to a smaller diameter.

At the screw point, a hex socket cap screw reduces the bore cross-section for clamping. A hex socket cap screw or an adjustable hand lever at the clamping joint serves for locking the joint axis. The clamping joint can be adjusted either steplessly or based on the serration pattern.

The flange with four or two bores serves as an interface or for fastening the clamp to the place of use.

Adjustable hand levers are intended for repeated, tool-free clamping. Under the designation HSK.P, these are available separately for individual use and in other designs. Compared with the tool-operated hex socket cap screw, the clamping force achievable with an adjustable hand lever is lower due to the shorter lever length.

RoHS-compliant product

 GSF.P Joint clamps, plastic Surface: 2 - Polyamide (PA), glass fiber reinforced, Black matt, temperature resistant up to 100 °C, RAL 9005
x<sub>1</sub>: 40
 GSF.P Joint clamps, plastic Surface: 2 - Polyamide (PA), glass fiber reinforced, Black matt, temperature resistant up to 100 °C, RAL 9005
x<sub>1</sub>: 75
 GSF.P Joint clamps, plastic Surface: 4 - Polyamide (PA), glass fiber reinforced, Gray matt, temperature resistant up to 100 °C, RAL 7040
x<sub>1</sub>: 40
 GSF.P Joint clamps, plastic Surface: 4 - Polyamide (PA), glass fiber reinforced, Gray matt, temperature resistant up to 100 °C, RAL 7040
x<sub>1</sub>: 75
Article options / Table

Type

SContinuous adjustment
TAdjustment in 10° steps (serration)

Screw points

2Hex socket cap screw stainless steel DIN 912-A2-70 and lock nut stainless steel DIN 985-A2, glide coating
Show columns
d1
Bore
x1d2kl1l2m1m2tx2y1y2Hex socket
cap screws

z1
Hex socket
cap screws

z2
Accessories
recom. hand lever
HSK.P for z
/ z2
lever length:: l3
B 30406,5451005433678-7560M8-25M8-2563 | 78
B 30756,5451005433678607560M8-25M8-2563 | 78
Build & Price
Bore d1
x1
Type


Screw points

Surface
Part number
GSF.P-B30-40-S-2-2
If there is no weight available, please contact our customer support:
phone: +49 (0)2226 - 90 98 7 - 0
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Quick-Login

For getting CAD data please enter you Email address. But we would be pleased, if you are fully registered.

Please enter the code you can find in the picture.

GSF.P-B30-40-S-2-2GSF.P-B30-40-S-2-4GSF.P-B30-40-T-2-2GSF.P-B30-40-T-2-4GSF.P-B30-75-S-2-2GSF.P-B30-75-S-2-4GSF.P-B30-75-T-2-2GSF.P-B30-75-T-2-4