1B Tube clamps
GSQ.P Joint clamps, plastic

GSQ.P Joint clamps, plastic

Original design
code: TCC-AP-TP
Product description

Joint clamps GSQ.P of glass fiber reinforced polyamide have a slitted clamping point. They are comprised of swivel clamps LST.P and LSQ.P.

The clamping point bores are situated in a plane and are connected by the clamping joint to swivel by ± 90°, from perpendicular to parallel. They receive typically available construction tubes with full surface contact over the entire cross-section of the bore.

Adapter bushings RBS.P can be used to reduce the bore cross-sections to a smaller diameter.

At the screw points, hex socket cap screws or adjustable hand levers reduce the bore cross-section for clamping. A hex socket cap screw or an adjustable hand lever at the clamping joint serves for locking the joint axis. The clamping joint can be adjusted either steplessly or based on the serration pattern.

Adjustable hand levers are intended for repeated, tool-free clamping. Under the designation HSK.P, these are available separately for individual use and in other designs. Compared with the tool-operated hex socket cap screw, the clamping force achievable with an adjustable hand lever is lower due to the shorter lever length.

RoHS-compliant product

 GSQ.P Joint clamps, plastic Surface: 2 - Polyamide (PA), glass fiber reinforced, Black matt, temperature resistant up to 100 °C, RAL 9005
 GSQ.P Joint clamps, plastic Surface: 4 - Polyamide (PA), glass fiber reinforced, Gray matt, temperature resistant up to 100 °C, RAL 7040
Article options / Table


SContinuous adjustment
TAdjustment in 10° steps (serration)

Screw points

2Hex socket cap screw stainless steel DIN 912-A2-70 and lock nut stainless steel DIN 985-A2, glide coating
Show columns
k1k2l1l2m1m2Hex socket
cap screws

Hex socket
cap screws

recom. hand lever
HSK.P for z1 / z2
lever length
B 30B 304544,5142546742M8-25M8-2563 | 78
Build & Price
Bore d1
Bore d2

Screw points

Part number
If there is no weight available, please contact our customer support:
phone: +49 (0)2226 - 90 98 7 - 0
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).

For getting CAD data please enter you Email address. But we would be pleased, if you are fully registered.

Please enter the code you can find in the picture.