1B Tube clamps
LSQ.P Swivel clamps, plastic

LSQ.P Swivel clamps, plastic

Original design
code: TCC-TP
Product description

Swivel clamps LSQ.P of glass fiber reinforced polyamide have a slitted clamping point. The fastening lug is smooth or has a crown serration that may be countersunk or raised.

The fastening lug is centered and perpendicular to the axis of the bore, which receives typically available construction tubes with full contact over the entire cross-section.

Adapter bushings RBS.P can be used to reduce the bore cross-sections to a smaller diameter.

The screw point of the fastening lug receives a hex head or hex socket cap screw or a lock nut for fastening any additional parts. At the clamping point, a hex socket cap screw or an adjustable hand lever reduces the bore cross-section for clamping.

By combining swivel clamps that have identical fastening lugs and corresponding centering ring serration, it is possible to assemble any type of joint clamp.

Adjustable hand levers are intended for repeated, tool-free clamping. Under the designation HSK.P, these are available separately for individual use and in other designs. Compared with the tool-operated hex socket cap screw, the clamping force achievable with an adjustable hand lever is lower due to the shorter lever length.

RoHS-compliant product

 LSQ.P Swivel clamps, plastic Type: AV - With external serration
Surface: 2 - Polyamide (PA), glass fiber reinforced, Black matt, temperature resistant up to 100 °C, RAL 9005
 LSQ.P Swivel clamps, plastic Type: AV - With external serration
Surface: 4 - Polyamide (PA), glass fiber reinforced, Gray matt, temperature resistant up to 100 °C, RAL 7040
 LSQ.P Swivel clamps, plastic Type: IV - With internal serration
Surface: 2 - Polyamide (PA), glass fiber reinforced, Black matt, temperature resistant up to 100 °C, RAL 9005
 LSQ.P Swivel clamps, plastic Type: IV - With internal serration
Surface: 4 - Polyamide (PA), glass fiber reinforced, Gray matt, temperature resistant up to 100 °C, RAL 7040
 LSQ.P Swivel clamps, plastic Type: OZ - Without centring step (smooth)
Surface: 2 - Polyamide (PA), glass fiber reinforced, Black matt, temperature resistant up to 100 °C, RAL 9005
 LSQ.P Swivel clamps, plastic Type: OZ - Without centring step (smooth)
Surface: 4 - Polyamide (PA), glass fiber reinforced, Gray matt, temperature resistant up to 100 °C, RAL 7040
Article options / Table

Type

OZWithout centring step (smooth)
AVWith external serration
IVWith internal serration

Screw point

2Hex socket cap screw stainless steel DIN 912-A2-70 and lock nut stainless steel DIN 985-A2, glide coating
Show columns
d1
Bore
b
Swivel width
d2kl1l2mstHex socket
cap screws
Accessories
recom. hand lever
HSK.P for z
lever length
l3
B 30408,544,595444213,520M8-2563 | 78
Build & Price
Bore d1
Type



Screw point

Surface
Part number
LSQ.P-B30-OZ-2-2
If there is no weight available, please contact our customer support:
phone: +49 (0)2226 - 90 98 7 - 0
This article is RoHS-compliant in application of Annex III., which means it complies with EU Directive 2011/65/EU, including extension (2015/863/EU), for restricting the use of certain hazardous substances in electrical and electronic devices. The Directive regulates the use of hazardous substances in devices and components. The implementation in national law is summarily described with RoHS(Restriction of (the use of certain) hazardous substances)).
Quick-Login

For getting CAD data please enter you Email address. But we would be pleased, if you are fully registered.

Please enter the code you can find in the picture.

LSQ.P-B30-OZ-2-2LSQ.P-B30-OZ-2-4LSQ.P-B30-AV-2-2LSQ.P-B30-AV-2-4LSQ.P-B30-IV-2-2LSQ.P-B30-IV-2-4